Alder Lake system includes DDR5, six GbE ports and 20 Gbps USB 3.2 Gen2X2

0






Neousys unveiled two embedded PCs based on Intel’s 12th Gen S-series with up to 64 GB of DDR5-4800: the “Nuvo-9000” has up to 6x GbE with optional PoE+, 5x USB 3.2 Gen2. 2 with PCIe Gen4 and up to 2x PCIe x16. There is also a smaller, fanless “Nuvo-9531”.

Neousys has announced two of the first embedded computers based on Intel’s 12th generation Alder Lake 7nm processors. The PCIe x16-equipped Nuvo-9000 and the more compact Nuvo-9531 use the high-end Alder Lake S-series processors.



Nuvo-9531 (left) and Nuvo-9000
(Click on the image to enlarge)

Rugged Systems offers two dual-core SKUs that utilize the recently revealed 12th Generation Pentium Gold and 12th Generation Celeron G Series processors. No OS support has been listed, but Linux and Windows should work fine.

The fanless Nuvo-9000 and Nuvo-9531 each offer the same 35W and 65W S-series choices, led by the high-end Core i9-12900E, which has 16 cores split into 8x Performance (P) and 8x Efficient (E) cores with a total of 24 threads. No clock speeds are listed, but Intel says the i9-12900 offers Turbo modes of up to 5 GHz (P) and 3.8 GHz (E). Neousys also offers slightly slower, power-optimized TE models for all six SKUs, with the i9-12900TE reaching Turbo rates of 4.8 GHz (P) and 3.6 GHz (E). The i9 chips provide 30MB of L3.

All available SKUs come with Intel UHD Graphics 770, which is based on the 32EU Iris Xe GPU architecture. Other options include the 12-core I7-12700E/TE, the hexa-core -5-12500E/TE, and the quad-core i3-12100E/TE. (See our Intel 12th Gen Alder Lake report for more details.)

Neousys systems also incorporate Intel’s new 600-series PCH platform controller hub, likely the 12th-gen-specific Z690. This allows the Nuvo-9000 to deliver USB 3.2 Gen2×2 at up to 20 Gbps. The Z690 chipset also supports PCIe Gen5/Gen4 and Wi-Fi 6E. The Nuvo-9000 and Nuvo-9531 each provide an M.2 slot with PCIe Gen4.

The Nuvo-9000, which follows older Nuvo-branded systems such as Neousys’ 9th Gen Coffee Lake-based Nuvo-8240GC, is the first product we’ve seen with USB 3.2 Gen2X2. The only other Alder Lake embedded PC we’ve seen is Vecow’s S-series based ECX-3000, which offers up to 8x 2.5GbE LAN ports with 4x PoE+ ports or 2x 10GigE LAN ports in option. (The Nuvo-9000 provides 2x or 6x GbE and the Nuvo-9531 has 4x GbE.) OnLogic, meanwhile, is readying an Alder Lake-S-powered Karbon 800 series with up to 14 LAN and PCIe Gen4 x16 ports, but has yet to reveal many details.

Among all the advances offered by Alder Lake, Neousys places particular emphasis on supporting its new systems with up to 64 GB (Nuvo-9000) or 32 GB (Nuvo-9531) of DDR5-4800 RAM. DDR5 is not available on Vecow or OnLogic systems.

Nuvo-9000

The Nuvo-9000 is available in at least six SKUs which differ based on PCIe and GbE options. Single PCIe x16 (16 lanes) “E” and PCI “P” models measure 240 x 225 x 90 mm. Dual PCIe x16 (8 lane) “DE” models measure 240 x 225 x 110.5mm.



Nuvo-9000, front and rear
(Click on images to enlarge)

In each of these SKUs, you can choose between Nuvo-9002 with 2 GbE ports and Nuvo-9006 with 6 GbE ports, all with screw connectors and Intel vPro/AMT 16.0 support. On the Nuvo-9006E, Nuvo-9006P and Nuvo-9006DE, 4 of the 6 GbE ports support optional PoE+ PSE (802.3at) with a total power budget of 100W.

PCIe and PCI slots are deployed using Neousys’ patented cassette design, which “eases installation and replacement procedures”. The product page also mentions some Nuvo-9000LP models, which support one or two 2.5-inch hot-swappable HDD/SSD trays instead of PCIe. All models provide 2 internal 2.5 inch SATA bays with RAID 0/1 support.

While the PCIe slots use PCIe Gen3, the Nuvo-6000 provides an M.2 M-key 2280 slot with PCIe Gen4 x4, thus supporting “the latest NVMe SSDs with disk read/write speeds of up to 7,000 MB/s,” says Neousys. . There is also an M.2 B-key 2242/3052 slot that can load up to 5G modules. A full-size mini-PCIe slot is also available along with two SIM card slots.

The USB 3.2 Gen2x2 port up to 20Gbps is deployed via a Type-C connector with screw lock. There are also 4 USB 3.2 Gen2x1 ports up to 10Gbps, 2 RS-232/422/485 ports and 2 RS-232 ports. (Note that the diagram detailed below appears to conflict with these USB specs, which are the same on the specs list and announcement. The diagram instead shows 4x USB 3.1 Gen2 and 4x USB 3.1 Gen1 using ports A standard instead of Type-C.)



Detailed view of the Nuvo-9000 (note: USB ports are probably incorrect – see above)
(Click on the image to enlarge)

A DisplayPort supports a resolution of up to 4096 x 2304, and VGA and DVI-D ports support 1920 x 1200. An audio I/O jack is also integrated.

Like the Neousys Elkhart Lake powered POC-400, there is a Neousys MezIO expansion interface, which provides computer signals, power rails and control signals through a high-speed connector. Available MezIO modules include RS-232/422/485, Isolated DIO, Ignition Power Control, USB 3.2 Gen 1, GigE, PoE+, and Storage.

The Nuvo-9000 is powered via an 8-48VDC terminal block, and there is a separate block for the remote control and power LED output. Four LEDs are included. Wall mounting is standard and DIN rail mounting and a 160W adapter are optional.

The operating range is -25 to 70°C (35W references) or -25 to 50°C (65W), both with a humidity tolerance of 10% to 90%, non-condensing. (The system appears to be fan-cooled.) Vibration resistance meets MIL-STD-810G, Method 514.6, Category 4 and shock resistance meets MIL-STD-810G, Method 516.6, Procedure I, table 516.6-II. There are also EN 55032 & EN 55024 certifications.

Nuvo-9531

The Nuvo-9531 measures 212 x 165 x 63mm, which is about two-thirds the size of the Nuvo-9000. The fanless system is designed for installations with limited space, such as in an autonomous mobile robot, robotic arm or semiconductor equipment.



Nuvo-9531, front and rear
(Click on images to enlarge)

The Nuvo-9531 has the same Alder Lake-S options as the Nuvo-9000 but is limited to 32GB of DDR5 via a single socket. The system has 4 GbE ports, 4 USB 3.2 Gen1 (5 Gbps), 2 USB 2.0 ports and 2 RS-232/422/485 ports. Dual displays are enabled via DP at 4096 x 2304 and VGA at 1920 x 1200, and an audio I/O jack is built-in.



Detailed view of the Nuvo-9531
(Click on the image to enlarge)

Other features include a single hot-swappable 2.5-inch HDD/SSD tray and an isolated 4-in/4-out DIO. Expansion features include the same M.2 M-key 2280 socket with PCIe Gen4 x4 and NVMe as provided for the Nuvo-9000. You also get an M.2 E-key 2230 jack for up to Wi-Fi 6 (802.11ax) or a Google Edge TPU module. Two full-size mini-PCIe slots provide internal SIM sockets.

The Nuvo-9531 is powered by an 8-48VDC terminal block with optional 120W adapter. Other features include 4x LEDs and optional DIN rail mounting.

There is a range of -25 to 60°C for the 35W and 65W references, although an optional fan is recommended for the latter. Humidity, shock, vibration and EMC resistance are the same as the Nuvo-9000.

More information

No pricing or availability information was provided for the “coming soon” Nuvo-9000 and Nuvo-9531. More information can be found in the Neousys announcement and that Nuvo-9000 and Nuvo-9531 launch page.



Source link

Share.

Comments are closed.